High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LU_0_TO_3
Chapter 3298
AP_HIGH
AP_MEDIUM
AP_LOW
def_data.lu_model
Type of the LU. Possible values are:
AP_3270_DISPLAY_MODEL_2
AP_3270_DISPLAY_MODEL_3
AP_3270_DISPLAY_MODEL_4
AP_3270_DISPLAY_MODEL_5
AP_PRINTER
AP_SCS_PRINTER
AP_RJE_WKSTN
AP_UNKNOWN (LU type will be determined when the
session to the host is established)
If the host system supports DDDLU (Dynamic
Definition of Dependent LUs), and this parameter is
set to any value other than AP_UNKNOWN, SNAplus2
will define the LU dynamically at the host when the
communications link to the host is established. If the
host does not support DDDLU, or if this parameter is
set to AP_UNKNOWN, the LU must be included in the
host configuration.
def_data.sscp_id
Specifies the ID of the SSCP permitted to activate this
LU. Set this parameter to 0 (zero) if the LU can be
activated by any SSCP. If the LU is to be activated only
by a specific SSCP, set the first four bytes of this
parameter to 0x05000000 and the last two bytes to the
SSCP ID that identifies the SSCP that is permitted to
activate the LU.
def_data.timeout
Timeout for the LU specified in seconds. If the timeout
is set to a nonzero value and the user of the LU
specified allow_timeout on the