High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3286
if the remote station is on a separate Token Ring
connected by a bridge.
xid_retry_limit
The XID retry limit value corresponds to the number of
times transmission and retransmission of an XID is
allowed. This count does not include the initial
transmission; that is, a value of 1 indicates “transmit
once and then retry once”. Higher values may be
needed if the remote station is on a separate Token
Ring connected by a bridge.
t1_timeout
Timeout required before an I-frame is retransmitted if
no response is received. The timer is specified in
milliseconds. Higher values may be needed if the
remote station is on a separate Token Ring connected
by a bridge.
Some systems may provide alternative methods of
configuring the LLC2 stack, in which case this
parameter may be ignored; check with your SNAplus2
supplier.
t1_retry_limit
The T1 retry limit value corresponds to the number of
times transmission and retransmission of an I-frame is
allowed. The minimum is 1. Higher values may be
needed if the remote station is on a separate Token
Ring connected by a bridge.
Some systems may provide alternative methods of
configuring the LLC2 stack, in which case this
parameter may be ignored; check with your SNAplus2
supplier.
Returned Parameters: Successful Execution
If the verb executes successfully, SNAplus2 returns the following
parameters:
primary_rc AP_OK