High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3 285
Call User Data: this parameter identifies the protocol
to be used over the underlying X.25 virtual circuit. For
most implementations, this should be set to a single
hex byte 0xC3, indicating QLLC. Some remote systems
may require additional bytes; check with the System
Administrator of the remote system.
DLC-specific data for Token Ring, Ethernet, FDDI:
mux_info.dlc_type
Type of the DLC.
Possible values are:
AP_IMPL_TR_DLPI
Token Ring
AP_IMPL_ETHER_DLPI
Ethernet
AP_IMPL_FDDI_DLPI
FDDI
test_timeout
Timeout required before a TEST frame is
retransmitted when trying to contact a remote station.
The timer is specified in milliseconds. Higher values
may be needed if the remote station is on a separate
Token Ring connected by a bridge.
test_retry_limit
The TEST retry limit value corresponds to the number
of times transmission and retransmission of a TEST
frame is allowed. This count includes the initial
transmission; that is, a value of 1 indicates “transmit
once but do not retry”. Higher values may be needed if
the remote station is on a separate Token Ring
connected by a bridge.
xid_timeout
Timeout required before an XID is retransmitted when
trying to contact a remote station. The timer is
specified in milliseconds. Higher values may be needed