High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3284
pvc_id
PVC identifier. Set this to a decimal number to identify
which PVC (from the range of PVCs defined for your
X.25 provider software) is to be used for this LS. This
field is reserved if vc_type above is set to VQL_SVC.
sn_id_len
Length of the subnet identifier that follows (in the
sn_id parameter). Set this parameter to 1 for a
single-port card, or 3 for a multi-portcard, to match the
length of the sn_id parameter as described below.
sn_id
Subnet identifier: this parameter identifies the
physical connection to the X.25 network.
Set it to a character string that matches the final
character(s) of the X.25 driver name, as follows:
• If you have more than one X.25 adapter card
installed in the HP-UX computer, set the first byte
of this parameter to the ASCII character 0 (zero) to
use the first card, the ASCII character 1 (one) to use
the second, and so on.
• If you have only one X.25 adapter card, set the first
byte of this parameter to the ASCII character 0
(zero) .
• If the card is a multi-port card, set the second byte
to the ASCII character p, and the third byte to the
ASCII character 1 (one) to indicate the first port on
the card, the ASCII character 2 to indicate the
second, and so on. For example, 0p2 indicates the
second port on the first (multi-port) card.
The parameter must be set to the ASCII character
value 0 or 1, not to the numeric value zero or one.
cud_len
Length of the Call User Data that follows (in the cud
parameter).
cud