High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3280
bit 4 Line is full-duplex (half-duplex if not
set)
The remaining bits are reserved.
stub_spec_data.opt2
Reserved.
stub_spec_data.linesp
The line speed for the line used on this port. For
example, 2400 (0x00000960) for a 2400 baud line. Valid
values are in the range 600-38,400 baud. The exact
meaning of this parameter depends on the value set on
the physical_link parameter.
•If physical_link is set to SDLC_PL_X21, then the
stub_spec_data.linesp parameter is ignored.
•If physical_link is set to SDLC_PL_V25 or
SDLC_PL_SMART_MODEM, then the value of the
stub_spec_data.linesp parameter is the speed at
which the dial string is sent to the modem.
—If physical_link is set to any other value, then
the value of the stub_spec_data.linesp
parameter is the speed of data transfer, only
valid if external clocking is specified.
stub_spec_data.rcv_pool_size
Reserved.
stub_spec_data.poll_wait
Reserved.
stub_spec_data.hmod_data_len
Length of the dial data string that follows (in the
hmod_data parameter). If no dial data is specified, set
this parameter to zero.
stub_spec_data.hmod_data
Dial data for outgoing calls. This parameter applies
only to switched links; it is reserved if the port
associated with this LS is defined to be nonswitched.