High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3 279
The frame to use for pre-activation polling. This is
normally XID, indicating that polling is in the control
of the DLC user. However, when SNAplus2 is primary
talking to an old secondary implementation, it may be
necessary to poll using some other frame. Possible
values are: XID, DISC, SNRM, SNRME, TEST.
poll_on_iframe
Specifies whether this link station is permitted to send
the poll bit on an I-frame. This allows SNAplus2 to
work with certain SDLC implementations which do not
handle receipt of I-frames carrying the poll bit.
Possible values are:
AP_YES
This link station is allowed to send the poll bit on an
I-frame.
AP_NO
This link station is not allowed to send the poll bit on
an I-frame.
stub_spec_data_len
Length of the Stub specific data that follows. Set this to
size of (STUB_SPEC_DATA).
stub_spec_data
Stub specific data. These fields are used only for
switched outgoing links. The values specified in this
structure override those defined in the Stub specific
data for the port that owns this LS; where fields in this
structure are shown as reserved, the values from the
port are used instead. For switched incoming links or
leased links, the parameters defined in the Stub
specific data for the port (not for the LS) are used.
The structure contains the following fields:
stub_spec_data.opt1
HMOD port options flag 1. Set the appropriate bits of
this field as follows (bit 7 is the most significant bit):
bit 6 Use NRZI (NRZ if not set)