High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3278
and stopped only when a frame with an F-bit is
received. The timeout should be set to a value not less
than twice the transmission time for the longest
I-frame plus adjacent station frame processing time.
The timer is specified in milliseconds.
no_resp_timer_retry
Number of times an adjacent secondary station is seen
to fail to respond before the primary sends an outage
message to the DLC user.
A value of 0xFFFF indicates an unlimited retry count.A
value of 0x0001 indicates that an outage should be
generated after the first timer expiry.
rem_busy_timer
Time allowed for an adjacent secondary station to be in
an RNR condition. This is used in conjunction with the
retry limit value to provide the overall time before an
outage message is sent. The timer is specified in
milliseconds.
rem_busy_timer_retry
Used in conjunction with the timeout value to provide
the overall timeout before an outage message is sent.
A value of 0xFFFF is used to indicate an unlimited retry
count. A value of 0x0001 indicates that an outage
should be generated after the first timer expiry.
rr_timer
The time in milliseconds to wait before turning the poll
bit around when the SDLC component has no work to
do.
This field may be set to zero, or to a nonzero value if the
immediate turn-around causes hardware problems on
the link. Higher values can also be used to optimize
link usage, because often the higher-level software will
generate data in response to the data contained in an
I-frame carrying the poll bit; the pause allows the data
to be received and processed.
poll_frame