High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3 277
disc_timer_retry
The Disconnect timer retry limit value corresponds to
the number of times transmission and retransmission
of a DISC is allowed.
A value of 0xFFFF indicates an unlimited retry count.A
value of 0x0001 indicates that an outage should be
generated after the first timer expiry.
nve_poll_timer
Timeout required before an adjacent secondary station
(which has previously been removed from the polling
list because it has no data to send) is reinserted into
the polling list. The timer is specified in milliseconds.
nve_poll_timer_retry
Number of times a station is removed from the polling
list on the normal poll timer before SNAplus2 switches
to using the slow poll timer.
A value of 0xFFFF indicates an unlimited retry count.A
value of 0x0001 indicates that the switch to the slow
poll should be made after the first timer expiry.
nve_poll_timer2
The slow negative poll timer in milliseconds. When the
negative poll timer retry count expires, SNAplus2
continues to poll using this timer. This prevents leased
(multi-drop) links from being flooded by poll frames for
idle stations.
nve_poll_timer_retry2
Number of times a station is removed from the polling
list on the slow poll cycle before an outage message is
sent to the HLS. Specify a value in the range 1-65,535.
This value is normally setto 0xFFFF, indicating infinite
retry.
no_resp_timer
The maximum time a primary station waits (after
having sent a frame with a poll bit) for a response
frame before trying to poll another station. This timer
is restarted when a frame without the F-bit is received