High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3 275
If you need to override the port's LS role for an
individual LS, specify one of the following values:
AP_LS_PRI Primary
AP_LS_SEC Secondary
AP_LS_NEG Negotiable
def_data.max_ifrm_rcvd
The maximum number of I-frames that can be received
by this link station before an acknowledgment is sent.
Specify a value in the range 0-127.If0 is specified, the
value from DEFINE_QLLC_PORT
DEFINE_SDLC_PORTis used.
def_data.dlus_retry_timeout
Reactivation timer for contacting a DLUS. If SNAplus2
fails to contact the DLUS, this parameter specifies the
time in seconds between retries.
Specify a value in the range 0x0001-0xFFFF.
def_data.dlus_retry_limit
The interval in seconds between the second and
subsequent attempts to contact the DLUS specified by
the dlus_name and bkup_dlus_name parameters.
Specify a value in the range 0x0001-0xFFFE, or specify
0xFFFF to indicate that SNAplus2 should retry
indefinitely until it contacts the DLUS. The interval
between the first and second attempts is always 1
second. If zero is specified, then the defaults specified
using the DEFINE_DLUR_DEFAULTS verb are used.
This parameter is ignored if the dspu_services
parameter is not set to AP_DLUR.
def_data.link_spec_data_len
Length of the link-specific data. The data should be
concatenated to the basic structure.
Link-specific data for SDLC:
mux_info.dlc_type
Type of the DLC. Set this to AP_IMPL_SDLC_SL