High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3274
AP_PROP_DELAY_TELEPHONE
Delay is in the range 480-49,512 microseconds (typical
for a telephone network).
AP_PROP_DELAY_PKT_SWITCHED_NET
Delay is in the range 49,512-245,760 microseconds
(typical for a packet-switched network).
AP_PROP_DELAY_SATELLITE
Delay is greater than 245,760 microseconds (typical for
a satellite link).
AP_PROP_DELAY_MAXIMUM
Maximum propagation delay.
def_data.tg_chars.user_def_parm_1 through
def_data.tg_chars.user_def_parm_3
User-defined parameters, which you can use to include
other TG characteristics not covered by the above
parameters. Each of these parameters must be set to a
value in the range 1-255.
def_data.target_pacing_count
Numeric value between 1 and 32,767 inclusive
indicating the desired pacing window size.(Thecurrent
version of SNAplus2 does not make use of this value.)
def_data.max_send_btu_size
Maximum BTU size that can be sent from this link
station. This value is used to negotiate the maximum
BTU size that a pair of link stations can use to
communicate with each other. The value includes the
length of the TH and RH (total 9 bytes) as well as the
RU. Specify a value in the range 265-65,535 (265-4105
for SDLC).
def_data.ls_role
Link station role. This is normally set to
AP_USE_PORT_DEFAULTS, specifying that the LS role
is to be taken from the definition of the port that owns
this LS.