High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3272
parameter is valid only if the adjacent node is an end
node or network node ( adj_cp_type is
AP_NETWORK_NODE, AP_END_NODE, or
AP_APPN_NODE); it is ignored otherwise.
Possible values are:
AP_YES
CP-CP sessions are supported. The
solicit_sscp_sessions parameter must be set to
AP_NO.
AP_NO
CP-CP sessions are not supported.
def_data.use_default_tg_chars
Specifies whether the default TG characteristics
supplied on the DEFINE_PORT verb should be used.
The TG characteristics apply only if the link is to an
APPN node; this parameter, and the parameters in the
tg_chars structure, are ignored otherwise. Possible
values are:
AP_YES
Use the default TG characteristics; ignore the
tg_chars structure on this verb.
AP_NO
Use the tg_chars structure on this verb.
def_data.tg_chars.effect_cap
Actual bits per second rate (line speed). The value is
encoded as a 1-byte floating point number, represented
by the formula 0.1 mmm * 2
eeeee
where the bit
representation of the byte is b'eeeeemmm'. Each unit of
effective capacity is equal to 300 bits per second.
def_data.tg_chars.connect_cost
Cost per connect time. Valid values are integer values
in the range 0-255, where 0 is the lowest cost per
connect time and 255 is the highest.
def_data.tg_chars.byte_cost