High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3270
INACTIVITY.
The minimum value is 5; valuesin the range 1-4 will be
interpreted as 5.
The value 0 (zero) indicates that no timeout is used
(the link is not deactivated, as if limited_resource
were set to AP_NO.
def_data.default_nn_server
End node: Specifies whether this is a link supporting
CP-CP sessions to a network node that can act as the
local node's network node server. When the local node
has no CP-CP sessions to a network node server and
needs to establish them, it checks this parameter on its
defined LSs to find a suitable LS to activate. This
allows you to specify which adjacent NNs are suitable
to act as the NN server (for example, to avoid using
NNs that are accessed by expensive or slow links).
Possible values are:
AP_YES
This link supports CP-CP sessions to a network node
that can act as the local node's NN server; the local
node can automatically activate this link if it needs to
contact an NN server. The cp_cp_sess_support
parameter must be set to AP_YES.
AP_NO
This link should not be automatically activated in an
attempt to contact a network node server.
If the local node is not an end node, this parameter is
ignored.
def_data.ls_attributes
This array contains further information about the
adjacent node, as described in the following
parameters:
def_data.ls_attributes[0]
Host type. Set this to AP_SNA unless you are
communicating with a host of one of the other types