High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3264
the following parameter or parameters.
For SDLC:
def_data.dest_address.address
Address of the secondary station on this LS.
• If the port that owns this LS is used only for
incoming calls ( out_link_act_lim on
DEFINE_PORT is zero), this parameter is reserved.
• If the port that owns this LS is switched primary
and is used for outgoing calls ( port_type is
AP_SWITCHED, ls_role is AP_LS_PRI, and
out_link_act_lim on DEFINE_PORT is nonzero),
either set this parameter to 0xFF to accept whatever
address is configured at the secondary station, or
set it to a 1-byte value in the range 0x01-0xFE
which must match the value configured at the
secondary station.
• Otherwise, set it to a 1-byte value in the range
0x01-0xFE to identify the link station. If the port is
primary multi-drop ( ls_role on DEFINE_PORT is
AP_LS_PRI and tot_link_act_lim is greater than
1), this address must be different for each LS on the
port.
For QLLC:
def_data.dest_address.address
Address of the destination node for this LS. This
parameter is used only for SVC outgoing calls (defined
by the vc_type parameter in the link-specific data, and
by the link activation limit parameters on
DEFINE_PORT); it is ignored for incoming calls or for
PVC.
The address is a string of 1-14 characters. The address
is in X.25 (1980) format; later address formats are not
supported.
For Token Ring, Ethernet, FDDI:
def_data.dest_address.mac_address
MAC address of adjacent node.