High Availability Monitors Version A.03.02 Release Notes

NOF API Verbs (ACTIVATE_SESSION to OPEN_FILE)
DEFINE_LS
Chapter 3 263
AP_APPN_NODE
The node type is unknown. SNAplus2 will determine
the type during XID exchange.
AP_END_NODE
End node, or up-level LEN node (one that includes the
Network Name CV in its XID3).
AP_NETWORK_NODE
Network node.
If the adjacent node is not an APPN node, use one of
the following values:
AP_BACK_LEVEL_LEN_NODE
Back-level LEN node (one that does not include the
Network Name CV in its XID3).
AP_HOST_XID3
Host node; SNAplus2 should respond to a polling XID
from the node with a format 3 XID.
AP_HOST_XID0
Host node; SNAplus2 should respond to a polling XID
from the node with a format 0 XID.
AP_DSPU_XID
Downstream PU; SNAplus2 should include XID
exchange in link activation. The dspu_name and
dspu_services fields must also be set.
AP_DSPU_NOXID
Downstream PU; SNAplus2 should not include XID
exchange in link activation. The dspu_name and
dspu_services fields must also be set.
If you want to run independent LU 6.2 traffic over this
LS, you must set the adj_cp_type parameter to
AP_APPN_NODE, AP_END_NODE, AP_NETWORK_NODE,or
AP_BACK_LEVEL_LEN_NODE.
def_data.dest_address.length
Length of the destination address field, as specified in