FW 05.01.00 and SW 07.01.00 HP StorageWorks CLI Reference Guide for Directors and Edge Switches (AA-RQ7AD-TE, June 2003)

Introduction
31CLI Reference Guide for Directors and Edge Switches
Note: The output examples shown in the other sections of this publication presume that
commaDelim is off.
Syntax
commaDelim enable
Purpose
This command enables the user to obtain displayed information (from a show
command) in comma-delimited, rather than tabular, format. The default format is
tabular.
Description
This command can be entered at any point in the command tree.
Parameter
This command has one parameter:
enable
Specifies the comma-delineated state for output. Valid values are true and false.
Boolean 1 and 0 may be substituted as values.
Command Examples
Root> commaDelim true
Config> commaDelim 1
Config.Port> commaDelim false
commaDelim