HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide

Introduction
Table 1-1: Required Components continued
Components Supported Products
FCIP interconnect Refer to the hp StorageWorks continuous access and data
replication manager SAN extensions reference guide at
http://h18006.www1.hp.com/storage/index.html.
Ethernet connection HP VNSwitch 900XA
Storage system HP EVA for HA/F500 Cluster, Version 3.010
Software HP StorageWorks Command View EVA
HP StorageWorks Continuous Access
HP StorageWorks Secure Path for Windows
Cluster interconnects
(public and private network)
FDDI or FCIP interconnect
Configurations
The following sections provide information on the basic and enhanced DT
configurations.
Basic DT Configuration
The basic DT configuration includes a second destination storage subsystem that
mirrors the data on the source storage subsystem. The basic DT configuration
consists of:
•
•
•
•
•
Two ProLiant servers as cluster nodes
Two storage subsystems
Four HP StorageWorks Fibre Channel SAN switches
(for a current list of supported switches, refer to
http://www.hp.com/servers/proliant/highavailability)
Two HBAs in each server
Two storage management appliances (SMAs), at least one for each site
1-6 HP ProLiant Cluster HA/F500 for Enterprise Virtual Array Enhanced DT Supplement Guide
HP CONFIDENTIAL
Writer: Woody Jernigan File Name: b-ch1 Introduction.doc
Codename: 49ers IV Part Number: 339223-002 Last Saved On: 9/30/03 10:44 AM