Compaq ProLiant Cluster HA/F500 Administrator Guide

Setting Up the ProLiant Cluster HA/F500 with Hubs
2-42 ProLiant Cluster HA/F500 for MA8000 Administrator Guide
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: c-ch2
Codename: Chargers Part Number: 355220-006 Last Saved On: 7/26/02 2:48 PM
3. Power on Server 2 in Cluster 2. (This server should have ALPA 8.)
NOTE: Do not power on any server in Cluster 1.
4. From the CLI window, type the following command and press Enter:
show connections
5. Write down the connections that are OL THIS or OL OTHER (OL = Online) for
renaming the connection in step 7.
6. Check the ALPA value of each connection. It should be 4 for Server 1 and 8 for
Server 2 from Cluster 2. If other connections are online, ignore them. The ALPA
is displayed as a six-digit number in the ADDRESS column (000004 or 000008).
7. Rename each connection by typing the following command and pressing Enter:
rename !newconxx xxxxxxxxx
NOTE: You may use a maximum of nine alphanumeric characters.
Example: rename !newconxx CLU2NODE1
8. Set the unit offset on each connection by typing the following command and
pressing Enter:
set xxxxxxxx unit_offset=108
9. Type the following and press Enter:
show connections
10. Verify the names and unit offsets assigned previously.