Compaq ProLiant Cluster HA/F500 Administrator Guide

Setting Up the ProLiant Cluster HA/F500 with Hubs
ProLiant Cluster HA/F500 for MA8000 Administrator Guide 2-7
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: c-ch2
Codename: Chargers Part Number: 355220-006 Last Saved On: 7/26/02 2:48 PM
Turning On the Subsystem Power
To power on the subsystem (see Figure 2-3):
1. Connect the storage subsystem cabinet to an AC power outlet (1).
2. Turn the storage subsystem power to the on position (2). (This refers to
RA8000/ESA12000 storage subsystems.)
3. Wait until the storage subsystem is completely booted and ready to operate.
4. Turn on both servers.
The storage subsystem is ready to operate when the Reset LED on the storage
controller operates at a rate of one blink per second.
1
2
Figure 2-3: Turning on the subsystem power
(RA8000/ESA12000)