Compaq ProLiant Cluster HA/F500 Administrator Guide

Secure Path Installation Procedures
ProLiant Cluster HA/F500 for MA8000 Administrator Guide 4-23
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: e-ch4
Codename: Chargers Part Number: 355220-006 Last Saved On: 7/26/02 2:52 PM
Table 4-4: Setting Up a Single Cluster with an Additional Storage
Subsystem (Dual Controller Configuration, Multibus Failover) with
Switches
continued
Chapters 3 and 4 Section Heading Page Action
Establishing a Redundant Path for the
Microsoft Cluster
For Switches Only
4-11 Step 2: Perform on all storage
subsystems
Steps 4-5: Omit
Step 6: Connect the top
controller to the first switch.
Connect the bottom controller
to the second switch.
Step 7: The maintenance
terminal has to be moved to
each additional storage
subsystem to perform the
following steps in the section.
Verifying the Secure Path Hardware
Configuration
4-14 Omit
NOTE: Refer to Chapter 5 for information on adding shared storage.