Compaq ProLiant Cluster HA/F500 Administrator Guide

Setting Up the ProLiant Cluster HA/F500 with Switches
3-40 ProLiant Cluster HA/F500 for MA8000 Administrator Guide
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: d-ch3
Codename: Chargers Part Number: 355220-006 Last Saved On: 7/26/02 2:50 PM
2. Follow the cluster installation instructions in Chapters 3 and 4 to set up the
second, third, or fourth cluster with the important exceptions included in
Table 3-12.
Table 3-12: Setting Up the Second Cluster (Single Controller
Configuration)
Chapter 3 and 4 Section Heading Page Action
Setting Controller to No Failover 3-12 Omit
Disabling the Command
Console LUN
3-13 Omit
Setting Port Topology 3-14 Omit
Discovering Devices 3-14 Execute section if additional
drives are added.
Verifying Controller Properties 3-17 Omit
Verifying Access 3-21 Step 12: Delete only the
connections that have
!NEWCONXX. Leave the
connection paths you renamed
previously.
Only add the connection
names that need access to the
new logical units.
Setting Storage Controllers to
Multibus Failover
4-5 Omit
Establishing a Redundant Path for
the Microsoft Cluster
For Switches Only: steps 1–8
4-11 Omit