Compaq ProLiant Cluster HA/F500 Administrator Guide

ProLiant Cluster HA/F500 for MA8000 Administrator Guide 2-1
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: c-ch2
Codename: Chargers Part Number: 355220-006 Last Saved On: 7/26/02 2:48 PM
2
Setting Up the ProLiant Cluster HA/F500 with
Hubs
Preinstallation Instructions
Before setting up the ProLiant Cluster HA/F500 with hubs, verify that the hardware
and software kits are appropriate for this installation. The following section gives
more details about the different installation configurations.
IMPORTANT: ACS 8.6 supports the use of hubs. ACS 8.7 does not support the use of hubs.
Checking the Hardware and Software
Use the following tables to verify that the appropriate hardware and software
installation kits were received. In the following tables, the numbers in parentheses
refer to configurations with two storage subsystems.
Table 2-1: Basic Configuration with Hubs (Single Storage
Controller)
Quantity Description
2 ProLiant servers
2 Host bus adapters
1 (2) Storage subsystem with one storage controller per subsystem
continued