Compaq ProLiant Cluster HA/F500 Administrator Guide

Setting Up the ProLiant Cluster HA/F500 with Switches
ProLiant Cluster HA/F500 for MA8000 Administrator Guide 3-17
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: d-ch3
Codename: Chargers Part Number: 355220-006 Last Saved On: 7/26/02 2:50 PM
Verifying Controller Properties
Perform the following procedures to verify controller properties.
Displaying SCSI Disks in the Devices Windowpane
To display SCSI disks in the devices windowpane:
1. Click Start on the taskbar.
2. Select Programs, Command Console, CLI Window.
3. Select Serial and click OK.
4. Select a baud rate of 9600, and click Connect.
NOTE: If a pop-up window reading “Error scanning subsystem” displays, wait
two minutes and retry the connection.
SWCC finds installed disks and displays them in a grid.