Compaq ProLiant Cluster HA/F500 Administrator Guide

Setting Up the ProLiant Cluster HA/F500 with Switches
ProLiant Cluster HA/F500 for MA8000 Administrator Guide 3-13
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: d-ch3
Codename: Chargers Part Number: 355220-006 Last Saved On: 7/26/02 2:50 PM
Disabling the Command Console LUN
NOTE: The Command Console LUN is disabled by default for SCSI mode SCSI-2. For SCSI
mode SCSI-3 the Command Console LUN cannot be disabled.
To disable the Command Console LUN:
1. Click Start on the Windows taskbar.
2. Select Programs, Command Console, CLI Window to display the Connection
Selection dialog box.
3. Select Serial and click OK to display the Connect Serial dialog box.
4. Select the COM port (the port to which the storage controller is connected).
5. Select a baud rate of 9600.
6. Click Connect to display the CLI window.
7. Type the following command and press Enter:
set this_controller nocommand_console_lun
8. After the prompt returns, type the following and press Enter:
show this_controller
9. Verify that the “Command Console LUN disabled” text appears in the controller
properties. If so, then continue with the next section.