Compaq ProLiant Cluster HA/F500 Administrator Guide

Setting Up the ProLiant Cluster HA/F500 with Switches
3-8 ProLiant Cluster HA/F500 for MA8000 Administrator Guide
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: d-ch3
Codename: Chargers Part Number: 355220-006 Last Saved On: 7/26/02 2:50 PM
To connect the server to the storage controller:
1. Connect the RJ-12 connector on the communications cable to the maintenance
port (1) on the storage controller.
2. Connect the 9-pin serial connector on the communications cable to either the
COM1 or COM2 port (2) on the server.
NOTE: Note which serial port is used. This information will be needed when setting up
the communications program and configuring the controller.
1
2
Figure 3-2: Designating a maintenance terminal