Compaq ProLiant Cluster HA/F500 Administrator Guide

Setting Up the ProLiant Cluster HA/F500 with Hubs
ProLiant Cluster HA/F500 for MA8000 Administrator Guide 2-3
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: c-ch2
Codename: Chargers Part Number: 355220-006 Last Saved On: 7/26/02 2:48 PM
Table 2-3: Enhanced Configuration with Hubs
Quantity Description
2 ProLiant servers
4 Host bus adapters
1 (2) Storage subsytem with two storage controllers per subsystem
1 Storage controller platform kit
2 (4) ACS Controller software
2 7- or 12-port Fibre Channel hubs
1 ProLiant Cluster HA/F500 Enhanced Kit containing an Ethernet
crossover cable for the server interconnect and Secure Path
software
1 Microsoft operating system, which includes Microsoft cluster
software
As
required
Optical Fibre Channel interconnect hardware
If any required component is missing, contact your local sales representative or call
1-800-652-6672.
Installing the Hardware
The following sections provide information on installing the hardware components
used in a ProLiant cluster.
Setting Up the Servers
Follow the installation instructions in the ProLiant server documentation to set up
each server as a stand-alone server. Then use the instructions in the following
sections to configure the cluster.