Compaq ProLiant Cluster HA/F500 Administrator Guide

Secure Path Installation Procedures
4-22 ProLiant Cluster HA/F500 for MA8000 Administrator Guide
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: e-ch4
Codename: Chargers Part Number: 355220-006 Last Saved On: 7/26/02 2:52 PM
Setting Up a Single Cluster with an Additional Storage Subsystem
(Dual Controller Configuration, Multibus Failover) with Switches
To set up a single cluster with an additional storage subsystem:
1. Set up the cluster with the first storage subsystem according to the instructions in
Chapters 3 and 4 of this guide.
2. Follow the cluster installation instructions in Chapters 3 and 4 of this guide to set
up the second, third, or fourth storage subsystem, with the important exceptions
included in Table 4-4.
Table 4-4: Setting Up a Single Cluster with an Additional Storage
Subsystem (Dual Controller Configuration, Multibus Failover) with
Switches
Chapters 3 and 4 Section Heading Page Action
Setting Up the Servers 3-5 Omit
Installing the Switch 3-10 Omit steps 4 and 5
Installing the StorageWorks Command
Console Client
3-11 Omit
Installing the Adapter Drive 3-15 Omit
Running the Fibre Channel Fabric
Setup Utility
3-16 Omit
Cluster Installation and Verification 3-26 Omit
Hardware Configuration Overview 4-7 Omit
continued