Compaq ProLiant Cluster HA/F500 Administrator Guide

Setting Up the ProLiant Cluster HA/F500 with Switches
ProLiant Cluster HA/F500 for MA8000 Administrator Guide 3-39
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: d-ch3
Codename: Chargers Part Number: 355220-006 Last Saved On: 7/26/02 2:50 PM
Setting Up Additional Clusters and Storage Subsystems
NOTE: When installing an additional clusters and additional storage subsystems, minimize
rebooting the existing cluster nodes because connection paths will be established on the new
storage subsystem for all servers that reboot and rescan for all available logical units. This can
become cumbersome when trying to establish permanent connection path names for the new
servers.
Set up the additional clusters according to the instructions starting on page 3-5.
Setting Up Dual Redundant Controllers (Multibus Failover)
The following text provides instructions for setting up a multiple cluster
configuration with dual redundant controllers (multibus failover).
Setting Up an Additional Cluster with a Single Storage Subsystem
To set up an additional cluster with a single storage subsystem:
1. Set up the first cluster according to the instructions in Chapters 3 and 4 of this
guide.