Compaq ProLiant Cluster HA/F500 Administrator Guide

Setting Up the ProLiant Cluster HA/F500 with Switches
3-30 ProLiant Cluster HA/F500 for MA8000 Administrator Guide
COMPAQ CONFIDENTIAL
Writer: Woody Jernigan File Name: d-ch3
Codename: Chargers Part Number: 355220-006 Last Saved On: 7/26/02 2:50 PM
Hardware Setup
To set up the hardware:
1. Click the Start button on the taskbar.
2. Select Program, Command Console, CLI Window.
3. Click CLI Window to display the Connection Selection dialog box.
4. Select Serial and click OK to display the Connect Serial dialog box.
5. Select the COM port (the port to which the storage controller is connected).
6. Select a baud rate of 9600.
7. Click Connect to display the CLI window.
8. Press Enter to initialize communications.
9. Type the following command and press Enter:
shutdown this_controller
10. Close the CLI window.
11. Shut down and power off both host servers.
12. Power off the storage subsystem.