Microsoft® Windows Embedded Standard (WES) 2009 for HP Thin Clients Quick Reference Guide

3 Configuration

Logging On

You can log on to the thin client either automatically or manually.

Automatic Logon

The default for the WES 2009-based thin client is automatic logon of the locked-down User account.

The administrator can use the HP Windows Logon Configuration Manager in the Control Panel to

enable/disable auto logon and change the auto logon user name, password, and domain. Only the

administrator account can change auto logon properties.

NOTE: To save changes, please perform the appropriate action depending on the write filter being

used. Please consult

Write Filters on page 33 for detailed instructions.

Enabling automatic logon bypasses the Log On to Windows dialog box. To log on as a different user

while auto logon is enabled, press and hold Shift while clicking Start > Shut Down > Log Off. This

opens the Log On to Windows dialog box and allows you to type in the logon information.

Logging On