R21xx-HP FlexFabric 11900 Series High Availability Command Reference

77
reset vrrp ipv6 statistics
Use reset vrrp ipv6 statistics to clear statistics for IPv6 VRRP groups.
Syntax
reset vrrp ipv6 statistics [ interface interface-type interface-number [ vrid virtual-router-id ] ]
Views
User view
Predefined user roles
network-admin
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
vrid virtual-router-id: Specifies an IPv6 VRRP group by its virtual router ID in the range of 1 to 255.
Usage guidelines
If no interface or VRRP group is specified, this command clears statistics for all IPv6 VRRP groups. If only
an interface is specified, this command clears statistics for all IPv6 VRRP groups on the specified interface.
If both an interface and an IPv6 VRRP group are specified, this command clears statistics for the specified
IPv6 VRRP group on the specified interface.
Examples
# Clear statistics for all IPv6 VRRP groups on all interfaces.
<Sysname> reset vrrp ipv6 statistics
Related commands
display vrrp ipv6 statistics
vrrp ipv6 vrid preempt-mode
Use vrrp ipv6 vrid preempt-mode to enable the preemptive mode for the router in an IPv6 VRRP group
and configure the preemption delay time.
Use undo vrrp ipv6 vrid preempt-mode to disable the preemptive mode for the router in an IPv6 VRRP
group.
Use undo vrrp ipv6 vrid preempt-mode delay to restore the default preemption delay.
Syntax
vrrp ipv6 vrid virtual-router-id preempt-mode [ delay delay-value ]
undo vrrp ipv6 vrid virtual-router-id preempt-mode [ delay ]
Default
The router operates in preemptive mode and the preemption delay is 0 seconds.
Views
Interface view
Predefined user roles
network-admin