R21xx-HP FlexFabric 11900 Series High Availability Command Reference

72
Predefined user roles
network-admin
Parameters
virtual-router-id: Specifies an IPv4 VRRP group by its virtual router ID in the range of 1 to 255.
virtual-address: Specifies a virtual IP address, which cannot be an all-zero address (0.0.0.0); a
broadcast address (255.255.255.255); a loopback address; an IP address of other than Class A, Class
B, and Class C; or an invalid IP address (for example, 0.0.0.1).
Usage guidelines
You can assign up to 16 virtual IP addresses to an IPv4 VRRP group.
If you create an IPv4 VRRP group but do not assign any virtual IP address to it, the VRRP group stays in
inactive state and does not function.
The virtual IP addresses of an IPv4 VRRP group must be in the same subnet as one of the IP addresses of
the interface where the VRRP group is configured. Otherwise, the hosts in the subnet cannot access
external networks.
Examples
# Create IPv4 VRRP group 1 and assign virtual IP address 10.10.10.10 to the VRRP group. Then assign
virtual IP address 10.10.10.11 to the VRRP group.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp vrid 1 virtual-ip 10.10.10.10
[Sysname-Vlan-interface2] vrrp vrid 1 virtual-ip 10.10.10.11
Related commands
display vrrp
IPv6 VRRP commands
display vrrp ipv6
Use display vrrp ipv6 to display the states of IPv6 VRRP groups.
Syntax
display vrrp ipv6 [ interface interface-type interface-number [ vrid virtual-router-id ] ] [ verbose ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number.
vrid virtual-router-id: Specifies an IPv6 VRRP group by its virtual router ID in the range of 1 to 255.