R21xx-HP FlexFabric 11900 Series High Availability Command Reference

68
Use undo vrrp vrid priority to restore the default.
Syntax
vrrp vrid virtual-router-id priority priority-value
undo vrrp vrid virtual-router-id priority
Default
The priority of a device in an IPv4 VRRP group is 100.
Views
Interface view
Predefined user roles
network-admin
Parameters
virtual-router-id: Specifies an IPv4 VRRP group by its virtual router ID in the range of 1 to 255.
priority-value: Specifies a priority value in the range of 1 to 254. A higher number indicates a higher
priority.
Usage guidelines
VRRP determines the role (master or backup) of each device in a VRRP group by priority. A device with
a higher priority is more likely to become the master.
The VRRP priority is in the range of 0 to 255. A greater number represents a higher priority. Priorities 1
to 254 are configurable. Priority 0 is reserved for special uses, and priority 255 is for the IP address
owner. The device acting as the IP address owner in a VRRP group always has a running priority of 255
and acts as the master as long as it works correctly.
Examples
# Configure the priority of the switch in VRRP group 1 on VLAN-interface 2 to 150.
<Sysname> system-view
[Sysname] interface vlan-interface 2
[Sysname-Vlan-interface2] vrrp vrid 1 priority 150
Related commands
• display vrrp
• vrrp vrid track
vrrp vrid shutdown
Use vrrp vrid shutdown to disable an IPv4 VRRP group.
Use undo vrrp vrid shutdown to restore the default.
Syntax
vrrp vrid virtual-router-id shutdown
undo vrrp vrid virtual-router-id shutdown
Default
An IPv4 VRRP group is enabled.