R21xx-HP FlexFabric 11900 Series High Availability Command Reference

24
Default
The global Ethernet OAM connection timeout timer is 5000 milliseconds.
Views
System view
Predefined user roles
network-admin
Parameters
interval: Specifies the Ethernet OAM connection timeout timer, in steps of 100 (in milliseconds). The value
range for this argument is 1000 to 25000.
Usage guidelines
After the timeout timer of an Ethernet OAM connection expires, the local OAM entity ages out its
connection with the peer OAM entity, causing the OAM connection to disconnect. To keep the Ethernet
OAM connections stable, HP recommends that you set the connection timeout timer at least five times the
handshake packet transmission interval.
The configuration in system view takes effect on all ports, but has a lower precedence than the
configuration in port view.
Examples
# Set the Ethernet OAM connection timeout timer to 6000 milliseconds.
<Sysname> system-view
[Sysname] oam global timer keepalive 6000
Related commands
• display oam configuration
• oam timer keepalive
oam mode
Use oam mode to set the Ethernet OAM mode.
Use undo oam mode to restore the default.
Syntax
oam mode { active | passive }
undo oam mode
Default
An Ethernet OAM-enabled Ethernet port operates in the active Ethernet OAM mode.
Views
Layer 2 Ethernet port view, Layer 3 Ethernet port view
Predefined user roles
network-admin
Parameters
active: Specifies the active Ethernet OAM mode.
passive: Specifies the passive Ethernet OAM mode.