R21xx-HP FlexFabric 11900 Security Command Reference

220
undo qos pre-classify
Default
The QoS pre-classify feature is disabled. That is, QoS uses the new IP header of IPsec packets to perform
traffic classification.
Views
IPsec policy view, IPsec policy template view
Predefined user roles
network-admin
Usage guidelines
The QoS pre-classify feature enables QoS to classify packets by using the IP header of the original IP
packets.
Examples
# Enable the QoS pre-classify feature.
<Sysname> system-view
[Sysname] ipsec policy policy1 100 manual
[Sysname-ipsec-policy-manual-policy1-100] qos pre-classify
remote-address
Use remote-address to configure the remote IP address for the IPsec tunnel.
Use undo remote-address to restore the default.
Syntax
remote-address { [ ipv6 ] host-name | ipv4-address | ipv6 ipv6-address }
undo remote-address { [ ipv6 ] host-name | ipv4-address | ipv6 ipv6-address }
Default
No remote IP address is specified for the IPsec tunnel.
Views
IPsec policy view, IPsec policy template view
Predefined user roles
network-admin
Parameters
ipv6: Specifies a remote IPv6 address. Without this keyword, you specify an IPv4 address or host name.
hostname: Specifies the remote host name, a case-insensitive string of 1 to 255 characters. The host
name can be resolved to an IP address by the DNS server.
ipv4-address: Specifies a remote IPv4 address.
ipv6-address: Specifies a remote IPv6 address.
Usage guidelines
This remote IP address configuration is required on the IKE negotiation initiator and optional on the
responder.