R21xx-HP FlexFabric 11900 MPLS Command Reference

52
Predefined user roles
network-admin
network-operator
Parameters
interface-type interface-number: Specifies an interface by its type and number. If you do not specify an
interface, this command displays information about all LDP interfaces.
Examples
# Display information about all LDP interfaces.
<Sysname> display mpls ldp interface
Interface MPLS LDP Auto-config
Vlan17 Enabled Configured -
Vlan20 Enabled Configured -
Table 22 Command output
Field Descri
p
tion
Interface Interface enabled with LDP.
MPLS Whether the interface is enabled with MPLS.
LDP Whether the interface is configured with the mpls ldp enable command.
Auto-config LDP automatic configuration (not supported).
Related commands
• mpls ldp
• mpls ldp enable
display mpls ldp lsp
Use display mpls ldp lsp to display information about LSPs generated by LDP.
Syntax
display mpls ldp lsp [ vpn-instance vpn-instance-name ] [ destination-address mask-length ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vpn-instance vpn-instance-name: Specifies an MPLS L3VPN instance by its name, a case-sensitive string
of 1 to 31 characters. The command displays LDP LSP information for the specified VPN. If you do not
specify a VPN instance, the command displays LDP LSP information for the public network.
destination-address mask-length: Specifies an FEC by an IP address and a mask length in the range of 0
to 32. If you do not specify a FEC, the command displays information about LDP LSPs for all FECs.