R21xx-HP FlexFabric 11900 MPLS Command Reference

170
Field Descri
p
tion
PW Attributes
PW attribute:
• Main—The PW is the primary PW.
• Backup—The PW is the backup PW.
• No-split-horizon—Split horizon forwarding is disabled (not supported).
• Hub link—The PW is the hub link in the VPLS hub-spoke network (not
supported).
• Spoke link—The PW is a spoke link in the VPLS hub-spoke network (not
supported).
VCCV CC
VCCV CC type:
• Control-Word—Control word.
• Router-Alert—MPLS router alert label.
• TTL—TTL timeout.
VCCV BFD
VCCV BFD type:
• Fault Detection with BFD—BFD packets use IP/UDP encapsulation (with
IP/UDP Headers).
• Fault Detection with Raw-BFD—BFD packets use PW-ACH encapsulation
(without IP/UDP Headers).
Tunnel Group ID ID of the tunnel group for the PW.
Tunnel NHLFE IDs
NHLFE IDs of the tunnels for the PW.
If equal-cost tunnels are available, this field displays multiple NIDs.
If no tunnel is available, this field displays None.
display l2vpn mac-address
Use display l2vpn mac-address to display MAC address table information for VSIs.
Syntax
display l2vpn mac-address [ vsi vsi-name ] [ dynamic ] [ count ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
vsi vsi-name: Displays MAC address table information for the VSI specified by its name, a case-sensitive
string of 1 to 31 characters. If no VSI is specified, the command displays MAC address table information
for all VSIs.
dynamic: Displays dynamically generated MAC address entries. If this keyword is not specified, the
command displays all types of MAC address entries. Currently, the device supports only dynamic MAC
address entries.
count: Displays the number of the MAC address entries. If you do not specify this keyword, the command
displays detailed information of the MAC address entries.