R21xx-HP FlexFabric 11900 MPLS Command Reference

160
Predefined user roles
network-admin
Parameters
wtr wtr-time: Specifies the wait time in the range of 0 to 180 seconds. When the primary PW recovers,
the PE waits for the specified time before switching traffic from the backup PW to the primary PW.
never: Disables backup to primary switchover.
Examples
# Specify the switchover wait time as 120 seconds for the cross-connect ac2pw in the cross-connect
group vpn1.
<Sysname> system-view
[Sysname] xconnect-group vpn1
[Sysname-xcg-vpn1] connection ac2pw
[Sysname-xcg-vpn1-ac2pw] revertive wtr 120
Related commands
display l2vpn pw
service-instance
Use service-instance to create a service instance on a Layer 2 Ethernet interface and enter service
instance view.
Use undo service-instance to delete a service instance.
Syntax
service-instance instance-id
undo service-instance instance-id
Default
No service instance is created on a Layer 2 Ethernet interface.
Views
Layer 2 Ethernet interface view
Predefined user roles
network-admin
Parameters
instance-id: Specifies the ID of the service instance, in the range of 1 to 4096.
Examples
# Create service instance 1 on the Layer 2 Ethernet interface Ten-GigabitEthernet 1/0/1 and enter
service instance 1 view.
<Sysname> system-view
[Sysname] interface ten-gigabitethernet 1/0/1
[Sysname-Ten-GigabitEthernet1/0/1] service-instance 1
[Sysname-Ten-GigabitEthernet1/0/1-srv1]