R21xx-HP FlexFabric 11900 MPLS Command Reference

149
Table 55 Command output
Field Descri
p
tion
Xconnect-group Name Cross-connect group name.
Connection Cross-connect name.
Peer IP address of the peer PE on the PW.
PW State
PW state: Up, Down, Blocked, or BFD Defect.
Blocked indicates that the PW is a backup PW. BFD Defect indicates BFD has
detected a defect on the PW.
Wait to Restore Time
Wait time to switch traffic from the backup PW to the primary PW when the
primary PW recovers, in seconds. If the switchover is disabled, this field displays
Infinite.
This field is available when both primary and backup PW exist, and is displayed
only for the primary PW.
Remaining Time Remaining wait time for traffic switchover, in seconds.
PW Attributes
PW attribute:
• Main—Primary PW.
• Backup—Backup PW.
VCCV CC
VCCV CC type:
• Control word.
• Route alert.
• TTL.
VCCV BFD
VCCV BFD type:
• Fault Detection with BFD. BFD packets use IP/UDP encapsulation (with IP/UDP
Headers).
• Fault Detection with Raw-BFD. BFD packets use PW-ACH encapsulation
(without IP/UDP Headers).
Tunnel Group ID ID of the tunnel group for the PW.
Tunnel NHLFE IDs
NHLFE IDs of the public tunnels that carry the PW.
If equal-cost tunnels are available, this field displays multiple tunnel NHLFE IDs.
If no tunnel is available, this field displays None.
display l2vpn pw-class
Use display l2vpn pw-class to display PW class information.
Syntax
display l2vpn pw-class [ class-name ]
Views
Any view
Predefined user roles
network-admin
network-operator