R21xx-HP FlexFabric 11900 MPLS Command Reference

6
2:2
Maximum Routes Limit : 2000
Threshold Value(%): 50
Table 4 Output description
Field Descri
p
tion
Interfaces Interface to which the VPN instance is bound.
Ipv4-family IPv4 VPN information.
Ipv6-family IPv6 VPN information.
Export VPN Targets Export route target attribute of the VPN.
Import VPN Targets Import route target attribute of the VPN.
Threshold Value(%)
Threshold for warning. When the percentage of the number of the received
route prefixes to the maximum number of routes supported reaches this
value, the device generates a prompt.
If no threshold is configured, this field is not displayed.
domain-id
Use domain-id to configure an OSPF domain ID.
Use undo domain-id to restore the default.
Syntax
domain-id domain-id [ secondary ]
undo domain-id [ domain-id ]
Default
The OSPF domain ID is 0.
Views
OSPF view
Predefined user roles
network-admin
Parameters
domain-id: Specifies an OSPF domain ID in one of the following formats:
• Integer, in the range of 0 to 4294967295. For example, 1.
• Dotted decimal notation. For example, 0.0.0.1.
• Dotted decimal notation:16-bit user-defined number in the range of 0 to 65535. For example,
0.0.0.1:512.
secondary: Specifies the domain ID as secondary. Without this keyword, the domain ID is primary.
Usage guidelines
When you redistribute OSPF routes into BGP on the MCE, BGP adds the configured OSPF domain ID to
the redistributed BGP VPN routes as a BGP extended community attribute and advertises the routes to the
BGP peer. When you redistribute the BGP VPN routes into OSPF on the BGP peer, OSPF uses the domain
ID to determine whether the routes belong to the same OSPF routing domain. If the domain ID is the same