R21xx-HP FlexFabric 11900 Layer 3 IP Services Command Reference

242
DHCPv6 relay agent commands
display ipv6 dhcp relay server-address
Use display ipv6 dhcp relay server-address to display DHCPv6 server addresses specified on the
DHCPv6 relay agent.
Syntax
display ipv6 dhcp relay server-address [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies an interface by its type and number. If no interface
is specified, the command displays DHCPv6 server addresses on all interfaces enabled with DHCPv6
relay agent.
Examples
# Display DHCPv6 server addresses on all interfaces enabled with DHCPv6 relay agent.
<Sysname> display ipv6 dhcp relay server-address
Interface: Vlan-interface2
Server address Outgoing Interface
2::3
3::4 Vlan-interface4
Interface: Vlan-interface3
Server address Outgoing Interface
2::3
3::4 Vlan-interface4
# Display DHCPv6 server addresses on VLAN-interface 2.
<Sysname> display ipv6 dhcp relay server-address interface vlan-interface 2
Interface: Vlan-interface2
Server address Outgoing Interface
2::3
3::4 Vlan-interface4