R21xx-HP FlexFabric 11900 Layer 3 IP Services Command Reference

219
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
address ipv6-address: Displays conflict information for the specified IPv6 address. If no IPv6 address is
specified, this command displays information about all IPv6 address conflicts.
Usage guidelines
The DHCPv6 server creates IP address conflict information in the following conditions:
• The DHCPv6 client sends a DECLINE packet to the DHCPv6 server to inform the server of an IPv6
address conflict.
• The DHCPv6 server discovers that the only assignable address in the address pool is its own IPv6
address.
Examples
# Display information about all address conflicts.
<Sysname> display ipv6 dhcp server conflict
IPv6 address Detect time
2001::1 Apr 25 16:57:20 2007
1::1:2 Apr 25 17:00:10 2007
Table 50 Command output
Field Description
IPv6 address Conflicted IPv6 address.
Detect time Time when the conflict was discovered.
Related commands
reset ipv6 dhcp server conflict
display ipv6 dhcp server expired
Use display ipv6 dhcp server expired to display lease expiration information.
Syntax
display ipv6 dhcp server expired [ address ipv6-address | pool pool-name ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
address ipv6-address: Displays lease expiration information for the specified IPv6 address.