R21xx-HP FlexFabric 11900 Layer 3 IP Services Command Reference

198
Syntax
ipv6 nd ra hop-limit unspecified
undo ipv6 nd ra hop-limit unspecified
Default
The maximum number of hops in the RA messages is limited to 64.
Views
Interface view
Predefined user roles
network-admin
Usage guidelines
To set the maximum number of hops to a value rather than the default setting, use the ipv6 hop-limit
command.
Examples
# Specify unlimited hops in the RA messages on VLAN-interface 100.
<Sysname> system-view
[Sysname] interface vlan-interface 10
[Sysname-Vlan-interface10] ipv6 nd ra hop-limit unspecified
Related commands
ipv6 hop-limit
ipv6 nd ra interval
Use ipv6 nd ra interval to set the maximum and minimum intervals for advertising RA messages.
Use undo ipv6 nd ra interval to restore the default.
Syntax
ipv6 nd ra interval max-interval-value min-interval-value
undo ipv6 nd ra interval
Default
The maximum interval between RA messages is 600 seconds, and the minimum interval is 200 seconds.
Views
Interface view
Predefined user roles
network-admin
Parameters
max-interval-value: Specifies the maximum interval for advertising RA messages in seconds, in the range
of 4 to 1800.