R21xx-HP FlexFabric 11900 Layer 3 IP Services Command Reference

162
brief: Displays brief information.
Usage guidelines
If the brief keyword is specified, this command displays brief information including physical status,
link-layer protocols, and IPv6 address.
If the brief keyword is not specified, this command displays detailed information including IPv6
configuration and operating information, and IPv6 packet statistics.
If no interface is specified, this command displays IPv6 information for all interfaces.
If only interface-type is specified, this command displays IPv6 information for the interfaces of the
specified type.
If interface-type interface-number is specified, this command displays IPv6 information for the specified
interface.
Examples
# Display IPv6 information for VLAN-interface 2.
<Sysname> display ipv6 interface vlan-interface 2
Vlan-interface2 current state: UP
Line protocol current state: UP
IPv6 is enabled, link-local address is FE80::1234:56FF:FE65:4322 [TENTATIVE]
Global unicast address(es):
10::1234:56FF:FE65:4322, subnet is 10::/64 [TENTATIVE] [AUTOCFG]
[valid lifetime 4641s/preferred lifetime 4637s]
20::1234:56ff:fe65:4322, subnet is 20::/64 [TENTATIVE] [EUI-64]
30::1, subnet is 30::/64 [TENTATIVE] [ANYCAST]
40::2, subnet is 40::/64 [TENTATIVE] [DHCP]
50::3, subnet is 50::/64 [TENTATIVE]
Joined group address(es):
FF02::1
FF02::2
FF02::1:FF00:1
FF02::1:FF65:4322
MTU is 1500 bytes
ND DAD is enabled, number of DAD attempts: 1
ND reachable time is 30000 milliseconds
ND retransmit interval is 1000 milliseconds
Hosts use stateless autoconfig for addresses
IPv6 Packet statistics:
InReceives: 0
InTooShorts: 0
InTruncatedPkts: 0
InHopLimitExceeds: 0
InBadHeaders: 0
InBadOptions: 0
ReasmReqds: 0
ReasmOKs: 0
InFragDrops: 0