R21xx-HP FlexFabric 11900 Layer 3 IP Services Command Reference

132
Syntax
In standalone mode:
display rawip verbose [ slot slot-number [ pcb pcb-index ] ]
In IRF mode:
display rawip verbose [ chassis chassis-number slot slot-number [ pcb pcb-index ] ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
pcb pcb-index: Displays detailed RawIP connection information for the specified PCB. The pcb-index
argument specifies the index of the PCB. The index value range is 1 to 16.
slot slot-number: Displays detailed RawIP connection information for the specified card. The slot-number
argument specifies the slot number of the card. (In standalone mode.)
chassis chassis-number slot slot-number: Displays detailed RawIP connection information for the
specified card on the specified IRF member device. The chassis-number argument specifies the ID of the
IRF member device. The slot-number argument specifies the slot number of the card. (In IRF mode.)
Usage guidelines
Use the display rawip verbose command to display detailed information about socket creator, state,
option, type, protocol number, and the source and destination IP addresses of RawIP connections.
Examples
# In standalone mode, display detailed information about RawIP connections.
<Sysname> display rawip verbose
Total RawIP Socket Number: 1
slot: 1
creator: dhcpd[265]
state: N/A
options: N/A
error: 0
rcvbuf(cc/hiwat/lowat/state): 0 / 9216 / 1 / N/A
sndbuf(cc/hiwat/lowat/state): 0 / 9216 / 512 / N/A
type: 3
protocol: 1
connection info: src = 0.0.0.0, dst = 0.0.0.0
inpcb flags: N/A
inpcb vflag: INP_IPV4
TTL: 255(minimum TTL: 0)
send VRF: 0xffff
receive VRF: 0xffff