R21xx-HP FlexFabric 11900 Fundamentals Configuration Guide

74
Configuring the device as an IPv6 TFTP client
Step Command Remarks
1. Enter system view.
system-view N/A
2. (Optional.) Use an ACL to
control the client's access to
TFTP servers.
tftp-server ipv6 acl acl-number
By default, no ACL is used for access
control.
3. Specify the source IPv6
address for TFTP packets
sent by the TFTP client.
tftp client ipv6 source { interface
interface-type interface-number |
ipv6 source-ip-address }
By default, no source IPv6 address is
specified. The source address is
automatically selected as defined in
RFC 3484.
4. Return to user view. quit N/A
5. Download or upload a file in
an IPv6 network.
tftp ipv6 tftp-ipv6-server [ -i
interface-type interface-number ]
{ get | put } source-filename
[ destination-filename ]
[ vpn-instance
vpn-instance-name ] [ source
{ interface interface-type
interface-number | ipv6
source-ipv6-address } ]
The source IP address set when you
use the tftp ipv6 command takes
precedence over the one set by the tftp
client ipv6 source command.