R21xx-HP FlexFabric 11900 Fundamentals Configuration Guide

FTP client configuration example (in IRF mode)

Network requirements

• Use the IRF fabric that comprises two member devices as the FTP client and the PC as the FTP server.

• Log in to the FTP server from the FTP client using the user account with username abc and password

123456 (which has been created on the PC).

• Download the file temp.bin from the FTP server to the FTP client, and upload the configuration file

config.cfg from the FTP client to the FTP server for backup.

Figure 31 Network diagram

Configuration procedure

# Configure IP addresses for devices and make sure they can reach other. (Details not shown.)

# Examine the storage space on the member devices for insufficiency. If no sufficient free space is

available, use the delete/unreserved file-url command to delete unused files. (Details not shown.)

# Log in to the FTP server using the username abc and password 123456 .

<Sysname> ftp 10.1.1.1

Connected to 10.1.1.1 (10.1.1.1).

220 WFTPD 2.0 service (by Texas Imperial Software) ready for new user

User (10.1.1.1:(none)): abc

331 Give me your password, please

Password:

230 Logged in successfully

Remote system type is MSDOS.

ftp>

# Set the file transfer mode to binary.

ftp> binary

200 TYPE is now 8-bit binary

# Download the file temp.bin from the PC to the Flash root directory of the IRF fabric's active MPU.

ftp> get temp.bin

local: temp.bin remote: temp.bin

150 Connecting to port 47457

226 File successfully transferred

23951480 bytes received in 95.399 seconds (251.0 kbyte/s)