R21xx-HP FlexFabric 11900 Fundamentals Configuration Guide

69
Task Command Remarks
Enable or disable FTP client debugging. debug
By default, FTP client debugging is
disabled.
Clear the reply information in the buffer. reset N/A
Terminating the FTP connection
Task Command Remarks
Terminate the connection to the FTP server
without exiting FTP client view.
• disconnect
• close
Use either command in FTP client
view.
Terminate the connection to the FTP server
and return to user view.
• bye
• quit
Use either command in FTP client
view.
Displaying command help information
To display command help information after you log in to the server:
Task Command Remarks
Display command help information
• help [ command-name ]
• ? [ command-name ]
Use either command.
Displaying and maintaining FTP client
Execute the display command in any view.
Task Command
Display source IP address
information on the FTP client
display ftp client source
FTP client configuration example (in standalone
mode)
Network requirements
• Use the device as the FTP client and the PC as the FTP server.
• Log in to the FTP server from the FTP client using the user account with username abc and password
123456 (which has been created on the PC).
• Download the file temp.bin from the PC to the device, and upload the configuration file startup.cfg
from the device to the PC for backup.