R21xx-HP FlexFabric 11900 Fundamentals Configuration Guide
58
Figure 26 Configuring advanced TACACS+ settings
Verifying the configuration
1. Telnet to the switch, and enter the username test@bbb and password aabbcc to access the user
interface. Verify that you have access to diagnostic commands.
<Switch> telnet 192.168.1.70
Trying 192.168.1.70 ...
Press CTRL+K to abort
Connected to 192.168.1.59 ...
******************************************************************************
Copyright (c) 2010-2013 Hewlett-Packard Development Company, L.P. *
* Without the owner's prior written consent, *
* no decompiling or reverse-engineering shall be allowed. *
******************************************************************************
login: test@bbb
Password:
<Switch>
2. Switch the user role: