R21xx-HP FlexFabric 11900 Fundamentals Configuration Guide

157
Step Command Remarks
2. Disable password recovery
capability.
undo password-recovery enable
By default, password recovery
capability is enabled.
Enabling/disabling the forwarding service buttons
Some switching fabric cards for the device have a forwarding service button. Before removing such a
card from the device, you can press the card's forwarding service button so other switching fabric cards
take over the forwarding service.
To avoid pressing the buttons accidentally, you can disable the buttons.
To enable or disable the forwarding service buttons on switching fabric cards:
Ste
p
Command Remarks
1. Enter system view.
system-view N/A
2. Enable or disable the
forwarding service buttons.
• To enable the buttons:
switch-mode jiggle enable
• To disable the buttons:
switch-mode jiggle disable
By default, the buttons are
enabled.
Configuring the asset profile of a physical
component
You can configure an asset profile for physical components, including chassis, cards, fan trays, and
power supplies for easy management.
NOTE:
For power supplies, you can only set their asset IDs.
To configure the asset profile of a physical component:
Step Command
1. Enter system view.
system-view
2. Configure the asset profile of a
physical component.
• In standalone mode:
set asset-info { chassis | fan fan-id | power power-id | slot
slot-number } { csn csn-number | custom name value | department
department | description description | location location |
service-date date | state state }
• In IRF mode:
set asset-info chassis chassis-number { chassis | fan fan-id | power
power-id | slot slot-number } { csn csn-number | custom name value
| department department | description description | location
location | service-date date | state state }