R21xx-HP FlexFabric 11900 EVB Command Reference

4
Field Descri
p
tion
Max ECP retry time
Maximum ECP retransmission times in the format: Local negotiation
value/Remote negotiation value/Operative value.
NA means no value is set on the remote EVB station.
ULPPDU retransmission exponent
ECP retransmission exponent in the format: Local negotiation
value/Remote negotiation value/Operative value.
NA means no value is set on the remote EVB station.
Resource wait-delay exponent
VDP resource-wait-delay exponent in the format: Local negotiation
value/Remote negotiation value/Operative value.
NA means no value is set on the remote EVB station.
Reinit keep-alive exponent
VDP keepalive exponent in the format: Local negotiation value/Remote
negotiation value/Operative value.
NA means no value is set on the remote EVB station.
display evb s-channel
Use display evb s-channel to display S-channel information.
Syntax
display evb s-channel [ interface interface-type interface-number ]
Views
Any view
Predefined user roles
network-admin
network-operator
Parameters
interface interface-type interface-number: Specifies a port by its type and number. If no interface is
specified, the command displays S-channel information for all ports with EVB enabled.
Examples
# Display S-channel information for Ten-GigabitEthernet 1/0/1.
<Sysname> display evb s-channel interface ten-gigabitethernet 1/0/1
RR status: D -- Disabled, E -- Enabled
MAC learning: A -- Allowed, F -- Forbidden
S-Channel SVID Uptime RR MAC VSI
interface yyyy/mm/dd hh:mm:ss status learning number
S-Channel1/0/1:1 1 2011/12/17 03:43:13 D A 0
S-Channel1/0/1:100 100 2011/12/17 03:43:14 D A 2
Table 3 Command output
Field Descri
p
tion
S-channel interface S-channel interface name.
Uptime Time when the S-channel was created.